Prosharp AS 1001-Portable Manuel d'instructions télécharger pdf (Page 15)

CHANGE OF THE GRINDING WHEEL

Changing of the wheel may only be done when the main power is switched o. But before

switching the power o please read these instructions.

1. Move the skate-holder to the left using the arrows on your control-panel.

2. Now remove the cover and use the 19mm wrench and loosen the nut.

3. Remove the wheel and replace it with a new one. (the label on the wheel should point

towards the front on the machine).

4. Tighten the nut and put the cover back on.

5. Reset the wheel size counter by pressing both arrows on the control-panel for three

seconds. Once you hear a ”beep” the reset is done.

For more detailed instructions how to change the grinding wheel, please take a look at our

Instructional Videos at www.prosharp.com

AS2001 Allpro

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 39 40

Pas de commentaire

Prosharp AS 1001-Portable Manuel d'instructions Page 15